Luoshi Machinery Co.,Ltd.
1 After the cloth is finished, introduce the guide cloth to the console, tear the guide cloth, click the main control button to red, and close the upper needle protection inlet button to “0”. Start the rear half of the machine, stop when the cloth guide head reaches the cloth feeding super-feeding roller, connect the guide cloth to the guide belt, close the cooling tube tension motor to “0” and start the rear half of the machine until the guide cloth is completely out of the cloth rack. Close the main cloth control button to red and start the machine to make the chain idle. Wuxi Shenxin Machinery: Operating Procedures for Forming Machines
2 Click the oven button to enter the heating system interface, set the heating temperature to 150 degrees, the circulating fan power is 50%, the exhaust fan is manually controlled and the air is exhausted at 100% power, so that the residual moisture in the oven can be effectively removed, thereby maintaining the oven. The role. After about 30 minutes of operation, turn off the heating system and let the circulating fan and exhaust fan continue to run until the temperature in the oven drops below 100 degrees.
3 The main control switch of the power cabinet of the power cabinet is turned to “OFF”. The computer automatically stores the processing data and then closes it to clean the whole machine.
Copyright © Yancheng City Luoshi Machinery Co.,Ltd All Rights Reserved.